Solid Absorbent Method for Sampling and Analysis of Nitrogen Dioxide in Ambient Air

A sampling and analysis system was developed for measuring concentrations of nitrogen dioxide in ambient air. Copper shot was found to be an effective absorbent for collecting samples at ambient levels. The analytical system was based on the desorption of the sample from the copper by heating in a hydrogen carrier stream. The desorbed sample was then determined by a combination of catalytic pyrolysis, which converted it to ammonia, and a Coulson Conductivity Detector. Data are presented showing overall recovery, effects of storage of collected samples, results for 24-hour sampling and interferences. Studies indicated the feasibility of the method for short time sampling as well as for 24-hour sampling periods. The detection limit was shown to be as little as 100 ng NO₂ in laboratory studies. This solid absorbent method provides a simple, convenient, and compact means for air sampling.     

Spatial distribution of uranium and thorium in the surface soil around proposed uranium mining site at Lambapur and its vertical profile in the Nagarjuna Sagar Dam

The understanding and evaluation of the possible interactions of various naturally occurring radionuclides in the world's third largest man-made dam, Nagarjuna Sagar located in Andhra Pradesh, India and built on river Krishna assumed significance with the finding of uranium deposits in locations near the dam. For the present work, surface soil samples from the mineralized area of Lambapur, Mallapuram, Peddagattu and sediment core samples from the Nagarjuna Sagar dam were analyzed for naturally occurring radionuclides namely uranium and thorium using gamma spectrometric technique. Also toxic elements lead and chromium were analysed by the Energy Dispersive X-ray Fluorescence Spectrometer (EDXRF) technique. Surface soil samples show a variation from 25 to 291 Bq/kg (2.02–23.5 mg/kg) for ²³⁸U and 32–311 Bq/kg (7.9–76.9 mg/kg) for ²³²Th. U/Th concentration ratio in surface soil samples ranged from 0.19 to 0.31 and was found comparable with the nation wise average of 0.26. The study of sediment core samples reflected higher U/Th concentration ratio of 0.30–0.33 in the bottom section of the core as compared to 0.22–0.25 in the upper section. The concentration ratio in the upper section of the core was similar to the ratio 0.23 found in the western Deccan Basalt region through which the river originates. A higher concentration of lead and chromium was observed in the upper section of the core compared to bottom section indicating the impact of river input on the geochemical character of dam sediment.     

Radioecology, radiobiology, and radiological protection: frameworks and fractures

A framework for the protection of the general public has been in existence for a very long time, although steps have recently been made by the ICRP to ensure that it is more fully comprehensive with regard to all actual and potential exposure situations. Protection of the environment, however, has only recently begun to be addressed in a structured manner, and is still an evolving subject. Nevertheless, it needs to be centred around some form of parallel framework to that which has evolved for the protection of human beings, although clearly on a different scale. It also needs to be embedded within the basic science of radiobiology, and form a central part of radioecology.     

Investigations on CO2 storage capacity in saline aquifers—Part 2: Estimation of storage capacity coefficients

Many studies on geological carbon dioxide (CO₂) storage capacity neglect the influence of complex coupled processes which occur during and after the injection of CO₂. Storage capacity is often overestimated since parts of the reservoirs cannot be reached by the CO₂ plume due to gravity segregation and are thus not accessible for storage. This work investigates the effect of reservoir parameters like depth, temperature, absolute and relative permeability, and capillary pressure on the processes during CO₂ injection and thus on estimates of effective storage capacity. The applied statistical characteristics of parameters are based on a large reservoir parameter database. Different measured relative permeability relations are considered. The methodology of estimating storage capacity is discussed. Using numerical 1D and 3D experiments, detailed time-dependent storage capacity estimates are derived. With respect to the concept developed in this work, it is possible to estimate effective CO₂ storage capacity in saline aquifers. It is shown that effective CO₂ mass stored in the reservoir varies by a factor of 20 for the reservoir setups considered. A high influence of the relative permeability relation on storage capacity is shown.     

Evaluating the role of environmental quality in the sustainable rural economic development of England

The issue of the sustainable development of rural economies in England has recently received considerable attention. This is because many of the poorest areas in the country are rural, often of high environmental quality, but suffering from high unemployment and a lack of services and facilities. The rapid decline in agricultural incomes and in-migration of affluent urban workers since 1990 has exacerbated economic inequality in such areas. A number of factors have the potential to drive rural development and this paper applies, and considers, the feasibility of a method from the USA for combining economic and environmental variables in a regional growth model to examine the hypothesis that environmental quality is an important determinant of sustainable rural development in England. The model output suggests that, although environmental quality does play a role in sustainable rural development in England there are other, more important, factors driving development. These include business and communications infra-structure, the degree and opportunities for commuting and underlying employment prospects. The robustness and limitations of the method for combining economic and environmental variables is discussed in relation to the spatial interrelatedness of Local Authority Districts in England, and conclusions are drawn about areas for refinement and improvement of the method.

Fate of nitrogen for subsurface drip dispersal of effluent from small wastewater systems

Subsurface drip irrigation systems apply effluent from onsite wastewater systems in a more uniform manner at a lower rate than has been possible with other effluent dispersal methods. The effluent is dispersed in a biologically active part of the soil profile for optimal treatment and where the water and nutrients can be utilized by landscape plants. Container tests were performed to determine the fate of water and nitrogen compounds applied to packed loamy sand, sandy loam, and silt loam soils. Nitrogen removal rates measured in the container tests ranged from 63 to 95% despite relatively low levels of available carbon. A Hydrus 2D vadose zone model with nitrification and denitrification rate coefficients calculated as a function of soil moisture content fit the container test results reasonably well. Model results were sensitive to the denitrification rate moisture content function. Two-phase transport parameters were needed to model the preferential flow conditions in the finer soils. Applying the model to generic soil types, the greatest nitrogen losses (30 to 70%) were predicted for medium to fine texture soils and soils with restrictive layers or capillary breaks. The slow transport with subsurface drip irrigation enhanced total nitrogen losses and plant nitrogen uptake opportunity.     

Control of Asphaltic Concrete Plants in Los Angeles County

Characteristics of maximum short-term ground level concentrations from an elevated point source, namely, the effective plume height, the critical wind speed, the distance to the point of maximum concentration, and the maximum concentration, are derived from the gaussian plume model. Both phases of plume development—before and after it has reached its final height—are considered. The plume rise treatment includes both thermal buoyancy and momentum effects. Certain limitations on critical wind speed are discussed. The dispersion model whose basis is established in this paper should be especially useful in applications where on site meteorological data are unavailable.     

Biofiltration of Trichloroethylene-Contaminated Air: A Pilot Study

Abstract

This project demonstrated the biofiltration of a trichloroethylene (TCE)-contaminated airstream generated by air stripping groundwater obtained from several wells located at the Anniston Army Depot, Anniston, AL. The effects of several critical process variables were investigated to evaluate technical and economic feasibility, define operating limits and preferred operating conditions, and develop design information for a full-scale biofilter system. Long-term operation of the demonstration biofilter system was conducted to evaluate the performance and reliability of the system under variable weather conditions. Propane was used as the primary substrate necessary to induce the production of a nonspecific oxygenase. Results indicated that the process scheme used to introduce propane into the biofiltration system had a significant impact on the observed TCE removal efficiency. TCE degradation rates were dependent on the inlet contaminant concentration as well as on the loading rate. No microbial inhibition was observed at inlet TCE concentrations as high as 87 parts per million on a volume basis.     

Sediment fluxes and the littoral drift along northeast Andhra Pradesh Coast, India: estimation by remote sensing

The littoral drift regime along the northeastern coast of India was investigated by analyzing coastal drift indicators and shoreline changes based on multitemporal satellite images. The study of offshore turbidity patterns and quantitative estimation of suspended sediments was undertaken to understand the magnitude and direction of movement of sediment fluxes. The study revealed that: (1) the character of coastal landforms and sedimentation processes indicate that the sediment transport is bidirectional and monsoon dependent; (2) multidate, multitemporal analysis of satellite images helps to show the nature of sediment transport along the coast. The dominant net sediment transport is in a NE direction along the eastern coast of India. Finally, this assessment demonstrates the potential of remote sensing technology in understanding the coastal morphometric changes, long-term sediment transport, shoreline changes, and offshore turbidity distribution pattern and the implications for the transport of sediment-associated pollutants.     

Reduction in toxicity and generation of slag in secondary lead process

This paper focuses on the improvement of a secondary lead recycling processing plant, giving special attention to the generation of lead slag. The study was conducted using two different industrial rotary furnaces that together produce three different slag types, which depend on charge composition and lead-containing raw material obtained from a lead-acid battery recycling process. First, characterization of three slag types from different batches was performed, and such characterization included chemical, mineralogical, and structural analyses. By analyzing these data and the operational conditions of the process, it was possible to identify certain deficiencies in the recycling process and implement modifications in order to improve it. A reduction of up to 25% in the quantity of slag generated could be achieved with certain charges. In addition to this process improvement, it was possible to reduce the toxicity of the slag produced when processing a charge containing the same proportion of paste and grid as the lead-acid battery. This improvement lessens the overall environmental impact of the process. By applying this methodology, it was possible to determine some principles of cleaner production in the lead recycling process. So, waste generation could be reduced via improvements in the process and slag characteristics were modified to decrease its toxicity (as determined by lead content in leaching tests).